Eccentric different-diameter pipe

ASTM A252 Standard is Specification for Welded and Seamless Steel Pipe Piles EN10219 / EN10210 S275J0H S355J0H ASTM/ASME A252/SA252 steel piling pipe is a structural pipe ideally suited for application in buildings, retaining walls, and other structures needing solid, dependably, quality made steel piling pipe as its structure.

The "8" character is a type of pipeline component, mainly for the convenience of maintenance. You can paint the upper half of the "8" character black to determine the specific shape. It's half a blind plate and half an iron ring. Commonly used for pipeline flanges that require process changes, the materials mainly include carbon steel, stainless steel, and alloy, which can be selected based on the pipeline pressure level and pipeline medium.

Out Diameter: 4"-20" Wall Thickness: 3-20mm Length : 3-12m, or according to customer’s requirement End: Plain End, Beveled End, Treaded End Standard: ASTM 5L, ASTM A53, ASTM A178, ASTM A500/501, ASTM A691, ASTM A252, ASTM A672, EN 10217

Pipe cap, also known as head, plug, cap, pipe cap, or blind, is a pipe fitting welded to the pipe end or installed on the external thread of the pipe end to cover the pipe. Used to close pipelines, with the same effect as pipe plugs. The form of blind plates is similar, except that blind plates can be dismantled for sealing, while welded pipe caps cannot be dismantled. The design of the pipe cap includes a convex pipe cap, a conical shell, a reducing section, a flat cover, and a tightening mouth. Convex pipe caps include: hemispherical pipe caps, elliptical pipe caps, dished pipe caps, and spherical crown pipe caps. From the perspective of force, the convex pipe cap gradually becomes less effective than the hemispherical pipe cap, but from the perspective of manufacturing difficulty, it gradually becomes easier to manufacture.

Stainless steel elbows need to be protected according to certain process measures during use and production, to protect the rationality and quality of castings. Production and processing should be carried out according to certain process techniques to protect the quality of stainless steel elbows. The stainless steel elbow is protected by a long nozzle and enters below the liquid level of the ladle. The ladle is sealed with a cover, and the sealing between the long nozzle and the ladle cover is also necessary to protect the sealing performance of the casting. Before injecting water into the stainless steel elbow ladle, the ladle is filled with argon (nitrogen) for about 6 minutes to ensure that the oxygen content inside the ladle is less than 2%. A certain amount of oxygen input is strictly controlled to ensure good performance during use. Through such protection, the oxygen content in stainless steel elbows will remain unchanged or decrease to some extent.

A pipeline silencer is a composite sound-absorbing hood with a composite structure of high temperature and high pressure steam, as well as low pressure steam, that enters the secondary pressure reducing body after a one-time expansion and pressure reduction in the silencer, and then forms low pressure or ultra-low pressure steam through a large volume expansion and pressure reduction. After being sprayed out, it is further silenced and reduced outside the pressure reducing body before being released into the atmosphere. The steam exhaust muffler of the waste heat boiler has the advantages of high safety factor, large noise reduction value, small equipment size, light weight, and easy installation.

The valve is a kind of energy saving valve, generally installed in the bottom valve of the water pump suction pipe to limit the return of liquid water in the water pump pipe, mainly used in the pumping line.

The solenoid valve has a sealed chamber with through holes at different positions, each connected to a different oil pipe. The middle of the chamber is a piston, and there are two electromagnets on both sides. The magnetic coil on which side is energized will attract the valve body to which side. By controlling the movement of the valve body, different oil discharge holes can be opened or closed. The oil inlet hole is usually open, and hydraulic oil will enter different oil discharge pipes, and then push the piston of the oil cylinder through the pressure of the oil, The piston drives the piston rod, which drives the mechanical device. In this way, mechanical motion is controlled by controlling the current flow of the electromagnet.

Product use: BQ41F heat preservation jacketed ball valve series is mainly used in petroleum, chemical, pharmaceutical, metallurgical, electric power and other systems to transport high viscosity medium which will solidify at room temperature. The jacket of the ball valve is welded between the sealing surfaces at both ends of the valve, and the standard connection port of the jacket is set at the side and bottom of the valve. Due to the increase of jacket, the end connection size of this kind of valve is one or two sizes larger than that of the same size. There are two types of valve end connection: flange and clamp. The jacket can freely pass through the steam and other thermal insulation medium to ensure that the viscous medium can pass through the valve smoothly.